 |
High-power, high-brightness 100 W QCW diode laser at 940 nm
C. Fiebig, G. Erbert, W. Pittroff, H. Wenzel, A. Maaßdorf, S. Einfeldt, and G. Tränkle
b Ferdinand-Braun-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin, Germany
Published in:
Proc. SPIE 6456, 64560K (2007).
© 1994-2007 SPIE - The International Society for Optical Engineering. Personal use of this material is permitted. However, permission to reprint/republish this material for
advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists,
or to reuse any copyrighted component of this work in other works must be obtained from the SPIE.

Abstract:
We demonstrate 940 nm diode lasers with more than 100 W QCW output power having an aperture
width 5 to 10 times smaller than commonly used 10 mm bars. We used a super-large vertical waveguide
structure to reduce the facet load. The waveguide design results in a very small vertical divergence of
only 14° FWHM (24° including 95% of power). The threshold current of a device with 1 mm
wide aperture is about 8 A and the slope efficiency is above 70%. The lateral far field
width is below 10°, including 95% of power, and the wall plug efficiency is around 50%
at 100 W output power.
Keywords:
diode lasers, quasi-CW, high-power, high-brightness, InGaAs/AlGaAs
Full version in pdf-format.
|
|