Bandwidth versus Efficiency Performance using Power Combining in GaN HEMT Power Amplifiers
Proc. 43th European Microwave Conf. (EuMC 2013), Nuremberg, Germany, Oct. 7-10, pp. 696-699 (2013).
Copyright © EuMA 2013. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the EuMA.
Transistors manufacturers are increasing the output power of their devices presently by enlarging the gate width of the transistors. This work discusses the tradeoff between the increased parasitic elements and the additional losses introduced by external power combining on board. Design goal of this work was to develop a 100 W power amplifier with optimum efficiency and maximum bandwidth. The first version is equipped with a single 100 W transistor. A second amplifier is realized using two power combined 50 W devices. The preliminary analysis is based on the theory of Bode and Fano. Using this approach the achievable bandwidth is predicted.
1 Microwave Engineering Laboratory, Berlin Institute of Technology, Berlin, Germany
2 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, 12489 Berlin, Germany
broadband amplifier; galium nitride; HEMT; power amlifier; power combining.