Design of 200 W Wideband Doherty Amplifier with 34 % Bandwidth
Proc. 43th European Microwave Conf. (EuMC 2013), Nuremberg, Germany, Oct. 7-10, pp. 279-282 (2013).
Copyright © EuMA 2013. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the EuMA.
This paper presents the design and implementation of a 200 W wideband harmonically-tuned Doherty amplifier. The power amplifier (PA) is targeted for wide range base stations operating within the frequency range 1.7-2.3 GHz. Proper and explicit design approach of the main output matching network was followed taking into consideration the frequency and power dependency of the load impedances introduced at the input and output ports of the matching network. The PA had an output power in the range of 153-205W, measured over 1.6-2.25 GHz (34% bandwidth). At 6 dB output power back-off, the PA had a minimum power-added efficiency (PAE) of 40%. Using digital pre-distortion (DPD) linearization for an LTE signal at 1.85 GHz, the PA had adjacent-channel leakage ratio (ACLR) of -40 dBc, measured at 28 W of average output power with average drain efficiency of 50%.
1 Microwave Engineering Lab, Berlin Institute of Technology, Berlin, Germany
2 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, 12489 Berlin, Germany
Doherty amplifier; efficiency enhancement; GaN HEMT; high power; wideband amplifier.