Efficient 600-W-Laser Bars for Long-Pulse Pump Applications at 940 and 975 nm
IEEE Photonics Technol. Lett., vol. 29, no. 19, pp. 1683-1686 (2017).
Copyright © 2017 IEEE - All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
We report the first demonstration of 1.2 J-emission into long pulses (≥2 ms) from passively cooled laser bars. These efficient high-fill-factor bars were developed for long-pulse pumping of Yb:CaF2-laser media at a power level of 600 W. The spatial brightness inferred (23 MW/cm2×sr) exceeds the state of the art. The bars are based on an extreme-double-asymmetric and an extremely-low-vertical-divergence epitaxial design for pumping at 940 and 975 nm, respectively. While the first design is optimized for high power-conversion efficiency ηE > 60% (at 600 W), the latter exhibits low vertical divergence to enable low-loss external spectral stabilization at the zero-phonon line of Yb:CaF2(ηE = 50% at 600 W). The higher ηE at 940 nm and lower thermal resistance due to its vertical structure improve the lateral farfield, increasing the brightness by nearly 50% over the 975 nm-structure. We varied the lateral layout comprising 186, 400, and 1200 µm-stripes at 70% fill-factor. The smaller stripes revealed the highest brightness, while the degree of polarization increases by 5% using wider stripes.
Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, 12489 Berlin, Germany
Semiconductor laser arrays, power conversion, optical pumping, power lasers, brightness.