Joule-Class 940-nm Diode Laser Bars for Millisecond Pulse Applications
IEEE Photonics Technol. Lett., vol. 27, no. 15, pp. 1663-1666 (2015).
© Copyright 2015 IEEE - All Rights Reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
The use of long resonators (for improved thermal and electrical resistance) and advanced facet passivation (for high power) is shown to enable Joule-class pulse emission from single passively cooled 1-cm diode laser bars emitting at 940 nm. Bars on CS-mount deliver pulse energy of 1 J at 60% power conversion efficiency within a 7-nm spectral window, under quasi-continuous wave conditions (1.2 ms 10 Hz). Robustness of device performance is confirmed via burn-in and multisite testing. Joule-per-bar performance is also maintained for conduction cooled monolithic stacked arrays, adapted for bars with long resonators. Although these packages only cool the laser bar via their rear edge, peak power, lateral far field, and spectral width remain consistent with the requirements for pumping solid state lasers and scale as predicted with self-heating. An energy density >10 J/cm2 is delivered from the stack surface, for brightness >3 MW/(cm2-sr).
1 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, 12489 Berlin, Germany
2 DILAS GmbH, 55129 Mainz, Germany
3 Lastronics GmbH, 07745 Jena, Germany
4 HiLASE Centre, Institute of Physics ASCR, v.v.i., 25241 Dolní Brecany, Czech Republic
5 STFC Rutherford Appleton Laboratory, Didcot OX11 0QX, U.K.
Semiconductor laser arrays, power conversion, pulse power systems, pumps, YAG lasers, cryogenics.