Progress in efficiency-optimized high-power diode lasers
Proc. SPIE, vol. 8898, Technologies for Optical Countermeasures X; and High-Power Lasers 2013: Technology and Systems, Dresden, Germany, Sep 23-26, 889807 (2013).
© 2013 COPYRIGHT SPIE--The International Society for Optical Engineering. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the SPIE.
High-power diode lasers are highly efficient sources of optical energy for industrial and defense applications, either directly or as pump sources for solid state or fiber lasers. We review here how advances in diode laser design and device technology have enabled the performance to be continuously improved. An overview is presented of recent progress at JENOPTIK in the development of commercial diode lasers optimized for peak performance, robust high-yield manufacture and long lifetimes. These diode lasers are tailored to simultaneously operate with reduced vertical carrier leakage, low thermal and electrical resistance and low optical losses. In this way, the highest electro-optical efficiencies are sustained to high currents. For example, 940-nm bars with high fill factor are shown to deliver continuous wave (CW) output powers of 280 W with conversion efficiency of > 60%. These bars have a vertical far field angle with 95% power content of just 40°. In addition, 955-nm single emitters with 90µm stripe width deliver 12 W CW output with power conversion efficiency at the operating point of 69%. In parallel, the Ferdinand-Braun-Institut (FBH) is working to enable the next generation of high power diode lasers, by determining the key limitations to performance and by pioneering new technologies to address these limits. An overview of recent studies at the FBH will therefore also be presented. Examples will include structures with further reduced far field angles, higher lateral beam quality and increased peak power and efficiency. Prospects for further performance improvement will be discussed.
1 JENOPTIK Diode Lab GmbH, Max-Planck-Str. 2, 12489 Berlin, Germany
2 JENOPTIK Laser GmbH, Göschwitzer Str. 29, 07745 Jena, Germany
3 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, D-12489 Berlin, Germany
Diode laser, high conversion efficiency, high power, high brightness, narrow divergence angle.