Pulsed RF Characterization of Envelope Tracking Systems for Improved Shaping Function Extraction

S. Paul1, N. Wolff1, C. Delepaut2, V. Valenta2, W. Heinrich1 and O. Bengtsson1

Published in:

Proc. 47th European Microwave Conf. (EuMC 2017), Nuremberg, Germany, Oct. 10-12, pp. 664-667 (2017).

Copyright © 2017 EuMA. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the EuMA.

Abstract:

This paper presents a measurement setup for pulsed RF characterization of a buck-converter based envelope tracking (ET) system. In contrast to continuous wave (CW) measurements, the proposed method allows ET system characterization over its full dynamic range without exceeding the power dissipation safe operating area. It includes the dynamic characterization of the individual subsystems, i.e., the envelope amplifier (EA) and the RF power amplifier (PA) with all signals at their interface. This includes also the non-linear and secondary effects like the EA load-impedance shift. The applicability of the test setup is demonstrated by characterizing a 57 W pulsed peak output power ET system based on a reverse buck converter and a floating-ground RF PA operating at 1620 MHz.

1 Ferdinand-Braun-Institut (FBH), Leibniz-Institut fuer Hoechstfrequenztechnik, 12489 Berlin, Germany
2 ESA/ESTEC, Noordwijk, The Netherlands

Keywords:

efficiency enhancement; envelope tracking; power supply ripple rejection; pulsed RF measurements; shaping function.