Upconversion spectral response tailoring using fanout QPM structures

A. Barh1, M. Tawfieq2, B. Sumpf2, C. Pedersen1, and P. Tidemand-Lichtenberg1

Published in:

Opt. Lett., vol. 44, no. 11, pp. 2847-2850 (2019).

Copyright © 2019 Optical Society of America. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Optical Society of America.

Abstract:

In this Letter, a novel technique for independent control of the phase-matched center wavelength and bandwidth (BW) is demonstrated for upconversion detection in the 2-4 µm range using a fanout lithium niobate (LN) crystal. A compact, all-semiconductor, 975 nm laser delivering 3.5 W of power is used as the pump in a single-pass upconversion configuration. A globar (∼800°C) is used as the infrared test source. Continuous tuning of the detected wavelength (λc:2.5-3.0µm) and BW (ΔλIR:35-225nm) has been realized using mechanical translation and rotation, respectively, of the fanout LN crystal. A comparison between the performance of the fanout LN and a conventional periodically poled LN crystal is made. The upconverted light is detected using a commercial silicon-spectrometer. The demonstrated technique allows tailored spectral upconversion based on collinear interaction. Numerical simulations are made to complement the experimental results.

1 DTU Fotonik, Technical University of Denmark, DK-4000 Roskilde, Denmark
2 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH), 12489 Berlin, Germany

OCIS codess:

(190.4360) Nonlinear optics, devices; (190.7220) Upconversion; (280.4788) Optical sensing and sensors.